Pioneer Tarping Systems


Wind Deflector (above) The wind deflector directs air flow to help keep the cover positioned properly on the load and aids in preventing asphalt cooling. It should be used with any solid fabric.
	Control Box Assembly (shown with chain guard) The control box assembly operates the cover system. The crank handle is designed to disengage and remain stationary when the cover unit (pivot arm framework) is in the covering motion. Controlled automatic covering is accomplished with a safe and simple braking system, and a positive locking pawl engages the sprocket when the cover unit is not in use. Gear reduction allows for easy cranking.

G1500 and ETC 1500D deluxe arm mounting bracket shown with heavy duty torsion spring and section of pivot arm.	G1500 arm mounting bracket shown with torsion spring and section of pivot arm with reinforcement strip.

G1000 optional under body installation of arm mounting bracket shown with torsion spring and section of pivot arm. (Recommended on bodies with low sides.)

Contact our Sales Department at (989) 755-4411 or (800) 292-0235
or e-mail
sales@scientificbrake.com

G1500 Semi-Automatic Cover System The cover is manually wound onto the roller assembly and torsion springs actuate the pivot arm framework. The control box assembly, heavy duty mesh cover and wind deflector are included.
	G1000 Semi-Automatic Cover System Direct drive, disengaging crank handle winds the economy cover onto the roller assembly. Controlled covering results by releasing the brake assembly. The pivot arm framework is torsion spring actuated. Wind deflector is optional.
ETC 1500D Fully Automatic Deluxe Cover System Fully automatic electrically powered deluxe system winds the cover onto the roller assembly. Features are a 12 volt D.C. power source, solenoid operated switch, forward and reverse power, automatic slip clutch and automatic resetting circuit breaker. The heavy duty pivot arm framework is actuated by torsion springs. A heavy duty mesh cover and wind deflector are included.