With capacities up to 22,500 lbs. and ride heights ranging from 6 to 12 inches, the RLU series will handle most low profile applications like drop frame vans and low boys. RLU offers the same advantages as the Neway topmount suspensions, including light weight, positive alignment, and a softer ride.

The EZ-ALIGN™ feature is standard.

With a capacity of 19,000 Ibs. and available ride heights ranging from 12 to 17 inches. The Two-pin axle connection protects axle while providing positive axle alignment.

The EZ-ALIGN™ feature is standard.

With a capacity of 22,500 Ibs. and ride heights ranging from 12 to 17 inches. Balanced suspension geometry softens ride, even in more difficult road conditions. Center Bag Lift is available on RL-228 models (14" ride height must use -4 model).

The EZ-ALIGN™ feature is standard.

The Neway RL-250 combines a big 25,000 Ibs. per axle capacity with the proven reliability and performance you've learned to depend on with Neway Air Ride. Center Bag Lift is available on RL-250 models.

The EZ-ALIGN™ feature is standard.

NOTE: See Warranty For Complete Details

- Now available for standard dry freight vans and heavier duty applications. All combine Neway's soft ride with many standard and optional features. Eliminate dock walk problems with Neway's new EDL External Dock Lock feature, and make slider-adjustments easier with Neway's Air Pin Puller.

Both are optional - The EZ-ALIGN™ feature is standard.

Axle capacity - 2O,OOO Ibs.

Provides greater payload protection, less cargo damage, and reduced wear and tear on your truck or tractor. The ART/ARTA Series allows the driver to lift an axle when not needed for loads, thereby reducing tire wear. Other benefits include easier maneuverability and elimination of tire scuff when axle is raised. There's no need to match drive tires as with a twin screw.

Make axle adjustments in minutes from the outboard side of the trailer. It's a very simple system. No special tools or welding is needed, you just loosen the lock nut, rotate the pivot bolt to adjust the alignment and retourque.

Now, Alignment Is As Easy As This:

1. Loosen the Lock nut - there is no weld to remove.
2. Rotate Bolt Head to achieve axle alignment.
3. Torque Lock Nut to 800 ft. Ibs. there is no weld to replace.

CBL Features:

• Easy Installation
• Can be retrofitted to Neway RL Series Air Suspensions.
• Mounts Below Frame For Tight Clearance Applications.

Now, with this OPTIONAL feature, your trailers will stay at the dock, once you've applied the trailer's parking brakes.* Neway's EDL is a simple lightweight flip-plate device, located on the underside of the frame rail. When the vehicle is parked and the air is released from the emergency brake system, a special service brake retracts causing the plate to flip down. The trailer is set at docks' height and will not walk forward.* EDL's simple and durable design is covered by a five-year warranty.** EDL is available on all Neway RLSA slider systems and some RL models.

* Brakes must be in proper working order
**See warranty for complete details.

• AC-6100 - For use with 1/4" air lines.Includes; Type CR Height Control Valve, Pressure Protection Valve, HCV Link Kit, Mounting Bracket, Axle Bracket & Hardware.
• AC-6100-1 - For use with 3/8" air lines.Includes; Type CR Height Control Valve, Pressure Protection Valve, HCV Link Kit, Mounting Bracket, Axle Bracket & Hardware.
• AC-84-M-3 - Manual AC Kit for RL suspensions using Center Bag Lift
• AC-84-S-3 - Electric Solenoid AC Kit for RLsuspensions using Center Bag Lift