E Z MOUNT™
(Standard on all Meyer Snow Plows)
|
E Z MOUNT™
|
|
 |
 |
Here's the Meyer E Z Mount ready to plow snow. This rock-solid, tubular front hardware package will support your Meyer Snow Plow with a firmness you have never felt before. |
 |
 |
Quick removal of the snow plow assembly takes just 1-2-3 easy steps. This exclusive Meyer feature makes handling of the components very manageable. The lift frame and lights are a single component,separate from the moldboard and can be carried through an ordinary man door for safe inside storage. |
 |
||
 |
 |
When Winter turns into Spring, it only takes minutes to remove two pins, pull the electrical disconnects and slide out the snow plow and lift frame, leaving the front of your vehicle clean and neat. When it's time to re-install. the E Z-Mount makes it easy as 1-2-3! |
The
World's Best Snow Plow
| The
Meyer MAX™ is not only a World
Class product, it is truly in a class by itself.
Pound for pound, kilogram for kilogram - it is stronger
than steel. The moldboard on the MAX™
is formed from a one-piece, unspliced sheet of 3/8"
(.95 cm) thick ultra high molecular weight polyethylene.
It will not embrittle in temperatures as low as -200
degrees F (-129 degrees C), and will not corrode. And the
MAX™ polyethylene moldboard has an
abrasion resistance six times better than carbon steel. The MAX™ surface is very slippery, which not only reduces friction, but improves snow rolling action. Less friction allows you to plow faster, saving time and fuel. Snow of all types and temperatures flies off the moldboard faster and further. Snow plowing with the Meyer MAX™ will be a truly World Class experience. |
|
 |
This Meyer
Snow Plow is equipped with the optional
Heavy Duty snow deflector; constructed of
seamless one piece 1/4" ultra high molecular weight
polyethylene. The curved shape is permanently molded yet
is flexible enough to absorb shock loads without damage.
This option is available for all steel and MAX™
polyethylene moldboards. HIGH CARBON STEEL CUTTING EDGE - can be removed and reversed for even longer life. BRIGHT YELLOW MARKERS - standard on all Meyer Snow Plows, indicate moldboard positionat a glance. HEAVY CAST RUNNERS - give proper support to moldboard, especially important when plowinggravel drives and parking lots. Sno-flo® POWDER COAT PAINT - all Meyer Snow Plows and mounting hardware receive a newstate-of-the-art powder coat paint. A high temperature baking process produces a durableenamel-like finish. |
SPECIFICATIONS
FOR STEEL
/ MAX™ POLYTHYLENE
NOTE:
A letter "P" in the Model Number indicates a MAX™
Ultra High Molecular Weight Polythylene Moldboard.
| Snow Plow Models |  Models TM-6, TM-6.5 For 4x4 Down Sized Pickups and Sport Utility Vehicles. |
 Models TMP-6.5, TMP-7 For 4x4 Down Sized Pickups and Sport Utility Vehicles. |
 Models ST-7, ST-7.5 For Standard Duty Pickups and Sport Utility Vehicles. NOTE: ST-7 available with two trip springs. |
|||
|---|---|---|---|---|---|---|
| Model | TM-6 | TM-6.5 | TMP-6.5 | TMP-7 | ST-7 | ST-7.5 |
| Moldboard Length | 6' | 6½' | 6½' | 7' | 7' | 7½' |
| Moldboard Height | 23" | 23" | 23" | 23" | 25" | 25" |
| Moldboard Gauge | 14 | 14 | 3/8" Poly | 3/8" Poly | 12 | 12 |
| Vertical Ribs | 4 | 4 | 4 | 4 | 4 | 4 |
| Trip Springs | 2 | 2 | 2 | 2 | 2 | 3 |
| Cutting Edge | 3/8" x 6" | 3/8" x 6" | 3/8" x 6" | 3/8" x 6" | 3/8" x 6" | 3/8" x 6" |
| Plowing Width At Full Angle | 64" | 69" | 69" | 74" | 74" | 79" |
| Sector | 11" | 11" | ||||
| Power Angling Rams | 1½" x 10" | 1½" x 10" | 1½" x 10" | 1½" x 10" | 1½" x 10" | 1½" x 10" |
| Average Weight Complete (lbs.) | 360 | 400 | 400 | 424 | 580 | 606 |
| Snow Plow Models |  Models STP-7, STP 7.5 For 4x4 Standard Duty Pickups and Sport Utility Vehicles. NOTE: STP-7 available with two trip springs. |
 Models C-7.5, C-8, C-8.5, C-9 For 4x4 Heavy Duty ¾ ton and 1 ton Pickups and 1 ton Cab Chassis. |
||||
|---|---|---|---|---|---|---|
| Model | STP-7 | STP-7.5 | C-7.5 | C-8 | C-8.5 | C-9 |
| Moldboard Length | 7 | 7½' | 7½' | 8' | 8½' | 9' |
| Moldboard Height | 27" | 27" | 28" | 28" | 28" | 28" |
| Moldboard Gauge | 3/8" Poly | 3/8" Poly | 12 | 12 | 12 | 12 |
| Vertical Ribs | 4 | 4 | 6 | 6 | 6 | 6 |
| Trip Springs | 2 | 3 | 4 | 4 | 4 | 4 |
| Cutting Edge | 3/8" x 6" | 3/8" x 6" | 3/8" x 6" | ½" x 6" | ½" x 6" | ½" x 6" |
| Plowing Width At Full Angle | 74" | 79" | 79" | 84" | 88" | 93" |
| Sector | 11" | 77" | 15" | 15" | 15" | 15" |
| Power Angling Rams | 1½" x 10" | 1½" x 10" | 1½" x 12" | 1½" x 12" | 1½" x 12" | 1½" x 12" |
| Average Weight Complete (lbs.) | 621 | 660 | 729 | 759 | 797 | 802 |
| Snow Plow Models |  Models HM-9, HM-10 For trucks with a G.V.W. of 13,800 to 27,000 |
 Models HMP-9, HMP-10 For trucks with a G.V.W. of 13,800 to 27,000 |
|||
|---|---|---|---|---|---|
| Model | HM-9 | HM-10 | HMP-9 | HMP-10 | |
| Moldboard Length | 9' | 10' | 9' | 10' | |
| Moldboard Height | 32" | 32" | 36" | 36" | |
| Moldboard Gauge | 7 | 7 | 3/8" Poly | 3/8" Poly | |
| Vertical Ribs | 7 | 7 | 7 | 7 | |
| Trip Springs | 6 | 6 | 6 | 6 | |
| Cutting Edge | ½" x 6" | ½" x 6" | ½" x 6" | ½" x 6" | |
| Plowing Width At Full Angle | 93" | 103" | 93" | 103" | |
| Sector | 15" | 15" | 15" | 15" | |
| Power Angling Rams | 2" x 12" | 2" x 12" | 2" x 12" | 2" x 12" | |
| Average Weight Complete (lbs.) | 1,205 | 1,254 | 1,222 | 1,271 | |
Also, MANY accessories/options available, contact us for more information.
For more information: sales@scientificbrake.com
Click here - Meyer Products -to visit their web site!